How to Build a Female SCART to Sony PVM Adapter

This adapter enable the use of RGB games consoles and computers on Sony PVM monitors which have BNC input for RGB and external Sync. It also works with others monitors which accept RGB and separate Sync signal thru BNC connectors.

The video signals, Red, Green, Blue and Sync are outputted via BNC connectors and the left and right audio is outputted via two separate RCA plugs.

Required Connectors:

· 1 Female Scart

· 4 Male BNC connectors

· 2 Male RCA connectors

Female Scart	Video SYNC	Video RED	Video Green	Video Blue
	Pin 20 – Sync in Pin 18 – Sync Ground	Pin 15 – Red Pin 13 – Red Ground	Pin 11 – Green Pin 9 – Green Ground	Pin 7 – Blue Pin 5 – Blue Ground
	Audio Left	Audio Right
	Pin 6 – Audio In Left Pin 4 – Audio Ground	Pin 2 – Audio In Right Pin 4 – Audio Ground

If the image is not properly displayed on your PVM, check in the User Config menu of the monitor that you selected RVB (not Component) as entry signal ;

(NB: Depending on PVMs models, Menu options can be named differently or a switch is available on the back of the moniteur)

Service Menu :

On some PVMs you can enter into the service menu in order to access advanced settings ;

Press « menu », then « degauss » and « enter » at the same time, that lets you enter to the service menu and change some parameters like the vertical and horizontal screen size.